Admission to Long Term Courses 2011-12

Central Institute of Tool Design is an ISO 9001:2000 certified premier Institute in Asia to provide specialized training in Tool Engineering, CAD/CAM & Mechatronics. The objective of the Institute is to meet the requirements of the Industries in the field of Tool Design & Manufacture and to train the technical personnel in these fields. The Institute was originally established in the year 1968 by the Govt. of India with the assistance of UNDP and ILO.

Commencement of Issue of Application Forms May 3, 2010 Last Date for submission of duly filled in Application Forms at CITD upto 5.00 P.M June 20, 2011 Last date for receipt of filled in applications with late fee of Rs.200/- at CITD upto 5.00 p.m. June 30, 2010 Entrance Test at Hyderabad July 11, 2010

Applications are invited in the prescribed form for admission into the following Long Term courses commencing from August 2010. Course -1 Post Graduate Course in Tool, Die & Mould Design (PGTD) ( Recognized by the Govt. of India, Ministry of Education, as an advanced Post Graduate qualification.) Duration One and a half years. ( 3 semesters) Eligibility B.E./B.Tech. (Mech./Prodn.) or recognized equivalent qualification. Age 30 years ( not born before 31.08.1980), for self sponsored. No. of Seats a) 32 seats Self sponsored. b) 28 seats Industry sponsored. Course Fee a) Rs. 60,000/- for Self Sponsored b) Rs. 75,000/- for Industry sponsored. Course -2 Post Diploma Course in Tool Design (PDTD) Duration One year. ( 2 semesters) Eligibility LME/DME with an aggregate of minimum 60% marks for general category candidates and an aggregate of minimum 50% marks for SC/ST category candidates. Age 27 years ( not born before 31.08.1983), for self sponsored. No. of Seats a) 36 seats Self sponsored. b) 24 seats Industry sponsored. Course Fee a) Rs. 24,000/- per semester for Self Sponsored b) Rs. 30,000/- per semester for Industry sponsored. Course -3 Diploma Course in Tool, Die & Mould Design (DTDM) Duration Four years ( 8 semesters) Eligibility SSC/Matric with an aggregate of minimum 50% marks for general category candidates and an aggregate of minimum 40% marks for SC/ST category candidates. Age 15 to 19 years ( not born before 31.08.1991) No. of Seats 60 seats Course Fee Rs.12,500/- per semester. Course -4 Advanced Tool Makers Course (ATM) Duration Two years (4 semesters) Eligibility SSC/Matric with ITI in any one of the trades-Tool & Die Maker/Fitter/ Machinist/Turner Age 25 years (not born before 31.08.1985) No. of Seats 30 Course Fee Rs.12,000/- per year Course -5 Advanced Machinist Course (AMC) Duration Three years (6 semesters) Eligibility SSC (10th Class) or equivalent examination appeared but failed with Maths & Science as subjects. Age 15 – 24 years (not born before 31.8.1986). No. of Seats 15 minimum and 30 maximum Mode of selection Selection on the basis of marks obtained in Maths & Science subjects in the qualifying examination i.e. 10th class failed. Course Fee Rs.8,500/- per semester Selection : Candidates for PGTD, PDTD and DTDM courses under all categories will be selected based on rank obtained in the Entrance examination. The successful candidates from GATE exam also need to qualify themselves in the Entrance Examination for PGTD Course. Candidates who wish to consider their application under sponsored category also, should submit the sponsoring letter and experience certificate along with the application. No age limit for sponsored category candidates. The candidates under sponsored category will be allotted seats strictly based on the rank obtained in the entrance examination subject to fulfilling the other criteria applicable to the category. For ATM course, the candidates will be selected based on merit in the qualifying examinatios i.e. X class & ITI with weightage in the ratio of 50:50 respectively For AMC course, the candidates will be selected based on the marks obtained in Maths & Science subjects in the qualifying examination (i.e. 10th class failed) How to Apply : Application form and prospectus can be obtained from Training Department, MSME Tool Room /Central Institute of Tool Design, Balanagar, Hyderabad – 500 037, on any working day between 9:30 AM and 5:00 PM.(Weekly holiday on Sunday) by paying application cost prescribed below in the form of cash or a crossed demand draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37 Application form can also be downloaded from the insitute website and the filled in application forms can be sent to the Director (Trg), CITD, Hyderabad, along with prescribed application cost by way of Demand Draft drawn in favor of Principal Director , CITD, Hyderabad, on any Nationalized Bank, preferably on State Bank of Hyderabad, Balanagar Branch, Hyderabad – 37. Applications can also be had by post on sending prescribed Demand Draft along with a request letter for application and prospectus, clearly indicating name of the course applied for and a self-addressed envelope (size 26 cms x 18 cms) duly affixed with Rs.15/- postage stamp. More details can be obtained from the institute website.

Address	:	MSME-Tool Room, Hyderabad Central Institute of Tool Design (A Govt. of India Society, Ministry of MSME) Balanagar, Hyderabad - 500 037 (A.P.)
Phone	:	040-23771959, 23776156, 23772747 ,23772748
Fax	:	040-23772658
E-mail	:	citdplacements@citdindia.org
Website	:	www.citdindia.org